Fleshlight Go Surge sleeve review

Surge is one of the two textures for the Fleshlight Go. The Go is a shortened version of the original Fleshlight. In contrast to other special versions like the Fleshlight Flight or the Quickshot, the design of the case remains the same. In the case of the Surge texture its color is black.

The other Fleshlight Go texture is called Torque. Its special features are the clear texture and case, which makes it possible to watch yourself while using it.

The idea of the Go Fleshlights is to have a regular Fleshlight, which is just slightly more compact and easier to transport. The length of the case is about 8.2 inches (21 cm); the insert itself has a length of 6.7 inches (17 cm). Another advantage of the compact body is the reduced weight of the Go compared to the classic Fleshlight.

In case the reduced length alone is not enough for you and you would prefer a more discrete look then you should go with the Fleshlight Flight and its Pilot and Instructor textures. If those are not compact enough, then you should take a look at the Fleshlight Quickshot.

Two chambers mirrored along the central transition

The Surge texture utilizes a two-chamber system. The special characteristic of these chambers is the continuously intensive stimulation due to a multitude of small ribs. The specialty of the texture is its symmetrical composition. So the whole first part is basically mirrored along the central transition.

Chamber 1: dense rib grid

The first chamber begins right after the Lady orifice. Immediately the first ribs of the checkerboard-style Surge texture start. The canal diameter here at the beginning measures about 1 inch (2,5 cm). Over the course of the chamber this diameter will decrease to about 0.6 inches (1,5 cm).

The rib grid, which spans over almost the entire first chambers surface, consists of many small ribs. They are split up into blocks of 3 ribs. Every single rib has a length of only 0.4 inches (1 cm) and is 0.12 inches (3 mm) thin. The three parts of each block are parallel to each other. As a result they form almost cubic blocks of 0.4 inches (1 cm) length and 0.47 inches (1,2 cm) width.

These building blocks are staggered, in order to make use of the available space. Additionally every second row of these rib blocks is turned by 90 degrees. Therefore the ribs do not all face the same direction, but switch the direction after each row.

The resulting grid provides a pleasant but not extremely intensive stimulation. Instead the texture produces a downright comfortable tightness and a great suction effect.

After about 2.75 inches (7 cm) the chamber ends and gives way to the central transition constriction. The rib structure terminates just slightly before that.

Transition in the centerpiece

The connection of the first and the second chamber is exactly in the middle of the Surge texture. It consists of three parts. One section that consists of larger, pointed bumps, one narrow constriction with a fine texture and another bump section just like the first one. Therefore the first and third parts are identical but mirror-inverted. This means that left and right of the central constriction the structures repeat, including the chambers.

The bump sections are about 0.6 inches (1,5 cm) long and consist of two rows of pointed bumps. The bumps of the first row are larger with a diameter of 0.4 inches (1 cm) than the ones in the second row which have a diameter of only 0.28 inches (0,7 cm).

Because the bumps are in a small excavation they do not stick straight to the center of their respective ring, but towards the center of the 0.6 inches (1,5 cm) long bump section.

Following the bumps is an almost 0.4 inches (1 cm) long constriction. It reduces the diameter to 0.6 inches (1,5 cm). The surface of the constriction has a fine texture consisting of small squares. Given the intense bumps to its left and right, these grooves only provide a minor negligible stimulation.

After the constriction a second bump section continues, as mentioned before. It consists of the exact same bumps as the already described part. But this time the penis first hits the smaller bumps and then the larger ones. That is because, as mentioned, the structures in this half of the texture are the same but in reverse order.

Chamber 2: as the first, but the other way round

The surface of the second chamber is obviously identical to the first one. But the other way round, so that the texture is mirrored. Therefore it starts off with the narrowest part and then begins to widen. This gives the Go Surge texture the special shape, where it starts and ends rather wide and narrows towards the center.

Great orgasms for all men

Surge creates, through its high stimulation but moderate intensity, great orgasms. A huge advantage of the shorter texture is that men with a shorter penis length can also completely enjoy it. In order to push into the centerpiece you only need about 3.5 inches (9 cm). Most men will therefore be able to enjoy the complete Surge texture.

Above-average cleaning time

Due to the extensive structures in Surge, the cleaning time of it is a bit above average. The fine gaps between the ribs and the bump sections around the center attract residues especially well. Cleaning those is most of the work, when cleaning Surge. But the advantage of the Go’s shorter length is also of help in this case. Because you can more easily reach into the texture than with the classic sleeves. The dry time after cleaning behaves similar. It is above average but not out of the ordinary.